| | DESIGNATION |
REMISE |
PRIX |
DISPO | |
 |
RUT0416 RAM-101-DAN1U
| |
133,54 € HT
160,24 € TTC | Sur
Commande | 
|
|
RUT1330 RAM-VP-SW1-12
| |
133,54 € HT
160,24 € TTC | Sur
Commande |
|
|
RUT6740 RAM-GDS-SKIN-AP32-NG-LED
| |
133,87 € HT
160,64 € TTC | Sur
Commande |
|
|
RUT7055 RAM-GDS-DOCK-SAM55U
| |
133,87 € HT
160,64 € TTC | Sur
Commande |
|
|
RUT7913 RAM-GDS-DOCKL-U4CP-CU
| |
133,89 € HT
160,66 € TTC | Sur
Commande |
|
|
RUT7334 RAM-HOL-ZE21PDU
| |
133,98 € HT
160,77 € TTC | Sur
Commande |
|
|
RUT1290 RAM-VP-SW1-4-2461
| |
134,42 € HT
161,30 € TTC | Sur
Commande |
|
|
RUT5271 RAM-VB-180B
| |
134,86 € HT
161,83 € TTC | Sur
Commande |
|
|
RUT3012 RAM-HOL-SYM3PU
| |
134,86 € HT
161,83 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4U :
• Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp
| | • Temp Right or NFC repeaterAdditional information: This holder
|
RUT7639 RAM-HOL-GE4U
| |
135,00 € HT
162,00 € TTC | Sur
Commande |
|
|
Cette RAM Mounts GDS IntelliSkin Thin-Case, pochette de protection avec Pogo-Pins, est conçue pour le Samsung Galaxy Tab S9 FE+, S9+ et S10+ et constitue un boîtier fin en deux parties développé spécifiquement pour être utilisé avec la station d'accueil GDS Uni-Conn. Le connecteur GDS intègre une fiche USB-C qui achemine à travers la coque vers les pogo-pins situés dans l'adaptateur GDS Uni-Conn.Les contacts pogo plats et robustes sont conçus pour un accostage fréquent, protègent le port de l'appareil et collectent moins de saleté, ce qui les rend plus faciles à nettoyer. Un port USB-C intégré en bas du boîtier permet de charger l'appareil même lorsqu'aucune station d'accueil GDS Uni-Conn n'est disponible.Grâce à sa conception réfléchie, toutes les fonctions de la tablette restent entièrement accessibles :
• la caméra
• les boutons et les ports peuvent toujours être utilisés sans restriction. L'IntelliSkin Thin-Case pour le Samsung Tab S9 FE+
| | • S9+ et S10+ est uniquement compatible avec les docks GDS Powered Un
|
RUT7783 RAM-GDS-SKIN-SAM96-TCB
| |
135,19 € HT
162,22 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU :
• Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp
| | • T
|
RUT7635 RAM-HOL-ZE25LU
| |
135,52 € HT
162,62 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHU :Spr
RUT7626 RAM-HOL-HON12PHU
| |
135,75 € HT
162,90 € TTC | Sur
Commande |
|
|
RUT0548 RAM-VP-SW1-8
| |
136,18 € HT
163,41 € TTC | Sur
Commande |
|
|
RUT3623 RAM-D-101U-MI1-2461
| |
136,18 € HT
163,41 € TTC | Sur
Commande |
|
|
RUT6967 RAM-HOL-SAM57PD2CLU
| |
136,62 € HT
163,94 € TTC | Sur
Commande |
|
|
RUT6595 RAM-GDS-DOCK-SAM67U
| |
136,62 € HT
163,94 € TTC | Sur
Commande |
|
|
RUT7393 RAM-D-111-C-402U
| |
136,62 € HT
163,94 € TTC | Sur
Commande |
|
|
RUT6869 RAM-HOL-SAM58PD2CLU
| |
137,06 € HT
164,47 € TTC | Sur
Commande |
|
|
USB-C, Dual USB-A, 60W Output, AMPS/VESA Mounting
RUT7509 RAM-GDS-DOCK-ZE21PD2U
| |
137,28 € HT
164,73 € TTC | Sur
Commande |
|
|
RUT0068 RAP-299-3-UN11U
| |
137,50 € HT
165,00 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons allow you to continue using them without any problems.An RAM NFC-Extender module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPKLT-AU :Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skinSlim-profile design at 2.28' depthAccess to the stylus penOptional attachment of additional devices or accessoriesEasy insertion and removalLockable with keyCharging functionInput Connector: USB-COutput Connector: USB-A (Perip
RUT7701 RAM-HOL-SAM58CPKLT-AU
| |
137,71 € HT
165,25 € TTC | Sur
Commande |
|
|
RUT7421 RAM-B-189-A-UN9U
| |
137,94 € HT
165,52 € TTC | Sur
Commande |
|
|
with power supply 5.5 mm jack plug, AMPS and VESA mount
RUT7537 RAM-HOL-ZE22PU
| |
138,35 € HT
166,02 € TTC | Sur
Commande |
|
|
RUT7418 RAM-HOL-HON9PU
| |
138,38 € HT
166,05 € TTC | Sur
Commande |
|
|
RUT6858 RAM-101B2-UN9U
| |
139,26 € HT
167,11 € TTC | Sur
Commande |
|
|
This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PHU :
• Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC
| | • CE & RoHSAdditional information: Devices shown are not included in the delivery.Only th
|
RUT7662 RAM-HOL-ZE32PHU
| |
139,53 € HT
167,43 € TTC | Sur
Commande |
|
|
RUT1417 RAM-VP-SW1-8-240
| |
139,59 € HT
167,50 € TTC | Sur
Commande |
|
|
RUT3173 RAM-VC-17NB
| |
139,59 € HT
167,50 € TTC | Sur
Commande |
|
|
RUT4458 RAM-VB-178A
| |
139,70 € HT
167,64 € TTC | Sur
Commande |
|
|
RUT7145 RAM-HOL-ZE11PDU
| |
139,70 € HT
167,64 € TTC | Sur
Commande |
|
|
lockable (key], USB-A/-C input, 2-hole AMPS mount
RUT7541 RAM-GDS-DOCKL-V12-ZE2434CPDU
| |
139,89 € HT
167,86 € TTC | Sur
Commande |
|
|
This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged.While keeping the Zebra EC5x secure, the powered dock also leaves the device?s top scanner and buttons exposed and usable.Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU :Only compatible with the IntelliSkin protective sleeveSpring-loaded design for easy insertion and removalIntegrated Stylus holderCharging functionInput Connector: USB-COutput Connector: USB-A (Peripheral output
RUT7710 RAM-GDS-DOCK-V12-ZE16CPDU
| |
139,92 € HT
167,90 € TTC | Sur
Commande |
|
|
RUT6945 RAM-GDS-DOCK-SAM80U
| |
140,03 € HT
168,03 € TTC | Sur
Commande |
|
|
RUT2205 RAM-VP-SW2-89
| |
140,03 € HT
168,03 € TTC | Sur
Commande |
|
|
This RAM Mounts Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments.Modular docks are not compatible with the GDS Hand-StandThe back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPKLN-CU :Compatible with accessoriesCan only be used with OEM or RAM skinAccess to the stylus penEasy insertion and removalCharging functionLockable with keyInput Connector: USB-COutput Connector:
RUT7714 RAM-HOL-SAM58CPKLN-CU
| |
140,09 € HT
168,10 € TTC | Sur
Commande |
|
|
La station d'accueil RAM Mounts GDS Uni-Conn est une station d'accueil autonome de 7 pouces conçue pour les appareils enfermés dans un IntelliSkin Thin-Case avec des Pogo Pads arrière.Cette solution peut pivoter à 180 degrés et permettre à l'appareil d'incliner 180 degrés, ce qui la rend idéale pour les industries axées sur les clients comme le commerce de détail, l'hôtellerie, la restauration, et plus encore.Elle dispose d'une plaque d'adaptation pour un montage par perçage, offrant une base stable.L'alimentation est fournie via une connexion USB-C aux Pogo Pads arrière intégrés dans le IntelliSkin Thin-Case.Elle prend également en charge un processus d'ancrage et de désancrage facile :
• L'appareil dans l'étui de protection IntelliSkin est simplement inséré dans la base de la station d'accueil et poussé jusqu'à ce qu'il s'enclenche.Pour le retirer
| | • une simple pression sur le levier libère la tablette.Caractéristiques du produit RAM-GDS-DOCK-D11-7-U3C :Compatible uniquement avec l'étui IntelliSkin Thin-Case (
|
RUT7814 RAM-GDS-DOCK-D11-7-U3C
| |
140,18 € HT
168,21 € TTC | Sur
Commande |
|
|
RUT7892 RAM-HOL-ZE47PDU
| |
140,25 € HT
168,30 € TTC | Sur
Commande |
|
|
RUT7726 RAM-GDS-DOCKLL-U1CPU
| |
140,36 € HT
168,43 € TTC | Sur
Commande |
|
|
RUT7054 RAM-GDS-DOCK-SAM65U
| |
140,69 € HT
168,82 € TTC | Sur
Commande |
|
01 43 00 43 08 (lundi au jeudi 8H30 18H30, vendredi 8H30 17H30) Contactez-nous
