| | DESIGNATION |
REMISE |
PRIX |
DISPO | |
|
Cloud White
(référence créée le 18.09.25) ALE301962
| |
1494,74 € HT
1793,68 € TTC |
En stock
20 pièces |
|
|
Cloud White
(référence créée le 18.09.25) ALE301962
| |
1494,74 € HT
1793,68 € TTC |
En stock
20 pièces |
|
|
Cloud White
(référence créée le 18.09.25) ALE301962
| |
1494,74 € HT
1793,68 € TTC |
En stock
20 pièces |
|
|
Cloud White
(référence créée le 18.09.25) ALE301962
| |
1494,74 € HT
1793,68 € TTC |
En stock
20 pièces |
|
 |
(référence créée le 18.09.25) OWC2174 OWCTB4ADP10GBE
| |
203,94 € HT
244,72 € TTC | Sur
Commande | 
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PLU :Compatible with accessori
(référence créée le 18.09.25) RUT7636 RAM-HOL-ZE22PLU
| |
161,92 € HT
194,30 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU :
• Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp
| | • T
|
(référence créée le 18.09.25) RUT7635 RAM-HOL-ZE25LU
| |
135,33 € HT
162,39 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) SUE93089 875217-001-REF
| |
133,99 € HT
160,79 € TTC |
En stock
11 pièces |
|
|
- :Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh
(référence créée le 18.09.25) RUT7634 RAM-HOL-ZE32PDHLU
| |
174,38 € HT
209,25 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25)
LVO561073 4X31R64467 | |
46,61 € HT
55,93 € TTC |
En stock
175 pièces |
|
 |
Licence de facturation Upfront (1 mois) + Production Support - Incréments de 1 To - volume - >1 PB - co-terme
(référence créée le 18.09.25) VAM7912 V-FDNCPT-1T-SU1MP-1P
| |
Prix
Nous consulter | Sur
Commande | |
|
36 MOS - Renewal
(référence créée le 18.09.25) SHS95018 NS138Z36ZZRCAA
| |
Prix
Nous consulter | Sur
Commande | |
|
Light Blue
(référence créée le 18.09.25) SNG184238
| |
168,19 € HT
201,82 € TTC |
En stock
156 pièces |
|
|
Light Blue
(référence créée le 18.09.25) SNG184238
| |
168,19 € HT
201,82 € TTC |
En stock
156 pièces |
|
|
Light Gold
(référence créée le 18.09.25) ALE301958
| |
1455,12 € HT
1746,14 € TTC |
En stock
4 pièces |
|
|
Light Gold
(référence créée le 18.09.25) ALE301958
| |
1455,12 € HT
1746,14 € TTC |
En stock
4 pièces |
|
|
Light Gold
(référence créée le 18.09.25) ALE301958
| |
1455,12 € HT
1746,14 € TTC |
En stock
4 pièces |
|
|
Light Gold
(référence créée le 18.09.25) ALE301958
| |
1455,12 € HT
1746,14 € TTC |
En stock
4 pièces |
|
|
Light Gold
(référence créée le 18.09.25) ALE301958
| |
1455,12 € HT
1746,14 € TTC |
En stock
4 pièces |
|
|
Silver
(référence créée le 18.09.25) ALE301957
| |
1913,76 € HT
2296,51 € TTC |
En stock
56 pièces |
|
|
Silver
(référence créée le 18.09.25) ALE301957
| |
1913,76 € HT
2296,51 € TTC |
En stock
56 pièces |
|
|
Silver
(référence créée le 18.09.25) ALE301957
| |
1913,76 € HT
2296,51 € TTC |
En stock
56 pièces |
|
|
Silver
(référence créée le 18.09.25) ALE301957
| |
1913,76 € HT
2296,51 € TTC |
En stock
56 pièces |
|
|
Silver
(référence créée le 18.09.25) ALE301957
| |
1913,76 € HT
2296,51 € TTC |
En stock
56 pièces |
|
|
(référence créée le 18.09.25) MIA4339 302P118181
| |
50,26 € HT
60,31 € TTC |
En stock
1 pièce |
|
|
- :
• Spring-loaded design for easy insertion and removalCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 5.4VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertification: FCC
• CE
| | • RoHSAdditional information: Devices shown are not inc
|
(référence créée le 18.09.25) RUT7633 RAM-HOL-ZE26PDHU
| |
153,85 € HT
184,62 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU :Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAddition
(référence créée le 18.09.25) RUT7632 RAM-HOL-GE4PDU
| |
204,54 € HT
245,44 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) RUT7631 RAM-HOL-HON12PDHLU
| |
172,23 € HT
206,67 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) SUE93088 RP001231665-REF
| |
215,75 € HT
258,89 € TTC |
En stock
9 pièces |
|
|
Alimentation ATX 3.0 - 80 Plus bronze - Bulk - Noir
(référence créée le 18.09.25)
FSP0888 9PA6507504 | |
52,16 € HT
62,59 € TTC |
En stock
52 pièces |
|
|
(référence créée le 18.09.25) JER5033 EX4400-48MXP
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM Vent-Temp can utilize the vehicle's air vents to direct hot or cold air to the Getac ZX70.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3FU :Compatible with the Getac tablet accessoiresEasy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-TempAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-GE3FU holder is supplied.
(référence créée le 18.09.25) RUT7630 RAM-HOL-GE3FU
| |
92,91 € HT
111,49 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC73 & TC78.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE17L-NP-1U :Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated Stylus holderLockable with keyAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE17L-NP-1U holder is supplied.
(référence créée le 18.09.25) RUT7629 RAM-HOL-ZE17L-NP-1U
| |
65,05 € HT
78,06 € TTC | Sur
Commande |
|
|
This RAM Mounts EZ-Roll?r holder is suitable for Zebra ET4x 8? series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDU :Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCOutput Connector: USB-A 2.0
(référence créée le 18.09.25) RUT7628 RAM-HOL-ZE20PDU
| |
94,67 € HT
113,60 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) SUE93087 4053162931084-REF
| |
215,75 € HT
258,89 € TTC |
En stock
9 pièces |
|
|
(référence créée le 18.09.25) SUE93086 718160-B21-REF
| |
74,49 € HT
89,39 € TTC |
En stock
1 pièce |
|
|
Deep Blue
(référence créée le 18.09.25) ALE301956
| |
1767,00 € HT
2120,40 € TTC |
En stock
6 pièces |
|
|
Deep Blue
(référence créée le 18.09.25) ALE301956
| |
1767,00 € HT
2120,40 € TTC |
En stock
6 pièces |
|
|
Deep Blue
(référence créée le 18.09.25) ALE301956
| |
1767,00 € HT
2120,40 € TTC |
En stock
6 pièces |
|
|
Deep Blue
(référence créée le 18.09.25) ALE301956
| |
1767,00 € HT
2120,40 € TTC |
En stock
6 pièces |
|
|
Deep Blue
(référence créée le 18.09.25) ALE301956
| |
1767,00 € HT
2120,40 € TTC |
En stock
6 pièces |
|
|
This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PLU :
• Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC
| | • CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PLU holder is supplied.
|
(référence créée le 18.09.25) RUT7627 RAM-HOL-ZE32PLU
| |
131,79 € HT
158,14 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHU :Spr
(référence créée le 18.09.25) RUT7626 RAM-HOL-HON12PHU
| |
135,57 € HT
162,68 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC73 & TC78.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged via a 5.5mm connector.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE17L-1U :Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated Stylus holderCharging functionLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 125 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE17L-1U holder is supplied.
(référence créée le 18.09.25) RUT7625 RAM-HOL-ZE17L-1U
| |
91,38 € HT
109,65 € TTC | Sur
Commande |
|
|
SW ONTAP One Pkg Per- 0.1TB NVME Add-On A09 -C [Cat : E]
(référence créée le 18.09.25) NPP5227 SW-ONTAPO-NVME-AD-A09-C
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 18.09.25) SUE93085 867254-001-REF
| |
133,99 € HT
160,79 € TTC |
En stock
11 pièces |
|
|
Space Black
(référence créée le 18.09.25) ALE301955
| |
1487,56 € HT
1785,06 € TTC |
En stock
6 pièces |
|
|
Space Black
(référence créée le 18.09.25) ALE301955
| |
1487,56 € HT
1785,06 € TTC |
En stock
6 pièces |
|
|
Space Black
(référence créée le 18.09.25) ALE301955
| |
1487,56 € HT
1785,06 € TTC |
En stock
6 pièces |
|
|
Space Black
(référence créée le 18.09.25) ALE301955
| |
1487,56 € HT
1785,06 € TTC |
En stock
6 pièces |
|
|
Space Black
(référence créée le 18.09.25) ALE301955
| |
1487,56 € HT
1785,06 € TTC |
En stock
6 pièces |
|
|
- :
• Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC
| | • CE & RoHSAdditional information: Devices shown are not included in the delivery.Only t
|
(référence créée le 18.09.25) RUT7624 RAM-HOL-ZE32PDLU
| |
147,77 € HT
177,32 € TTC | Sur
Commande |
|
zoom |
(référence créée le 18.09.25)
TKA0817 RUTX11240000 | |
296,43 € HT
355,71 € TTC |
En stock
57 pièces |
|
|
JAYM®
(référence créée le 18.09.25) JYM1323 JMCSVT104
| |
10,12 € HT
12,13 € TTC |
En stock
115 pièces |
|
|
(référence créée le 18.09.25) JER5032 SVC-COR-EX44M48XP
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 18.09.25) SUE93084 880152-001-REF
| |
133,99 € HT
160,79 € TTC |
En stock
11 pièces |
|
|
(référence créée le 18.09.25) JER5031 EX4400-48XP
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 18.09.25) POE46292 2P-B173RTN03.2
| |
105,82 € HT
126,98 € TTC |
En stock
6 pièces |
|
|
- :Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput
(référence créée le 18.09.25) RUT7623 RAM-HOL-ZE32PDHU
| |
151,95 € HT
182,34 € TTC | Sur
Commande |
|
|
A17 5G - Solid Black Mat - Soft bag
(référence créée le 18.09.25) MLS2563 66100
| |
9,56 € HT
11,47 € TTC | Sur
Commande |
|
|
Sky Blue
(référence créée le 18.09.25) ALE301954
| |
1494,74 € HT
1793,68 € TTC |
En stock
15 pièces |
|
|
Sky Blue
(référence créée le 18.09.25) ALE301954
| |
1494,74 € HT
1793,68 € TTC |
En stock
15 pièces |
|
|
Sky Blue
(référence créée le 18.09.25) ALE301954
| |
1494,74 € HT
1793,68 € TTC |
En stock
15 pièces |
|
|
Sky Blue
(référence créée le 18.09.25) ALE301954
| |
1494,74 € HT
1793,68 € TTC |
En stock
15 pièces |
|
|
Sky Blue
(référence créée le 18.09.25) ALE301954
| |
1494,74 € HT
1793,68 € TTC |
En stock
15 pièces |
|
|
18 MOS - Renewal
(référence créée le 18.09.25) SHS95017 ES450018ZZRCAA
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8? series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDKLU :Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5
(référence créée le 18.09.25) RUT7622 RAM-HOL-ZE20PDKLU
| |
125,73 € HT
150,87 € TTC | Sur
Commande |
|
|
Cosmic Orange
(référence créée le 18.09.25) ALE301953
| |
1698,49 € HT
2038,19 € TTC |
En stock
10 pièces |
|
|
Cosmic Orange
(référence créée le 18.09.25) ALE301953
| |
1698,49 € HT
2038,19 € TTC |
En stock
10 pièces |
|
|
Cosmic Orange
(référence créée le 18.09.25) ALE301953
| |
1698,49 € HT
2038,19 € TTC |
En stock
10 pièces |
|
|
Cosmic Orange
(référence créée le 18.09.25) ALE301953
| |
1698,49 € HT
2038,19 € TTC |
En stock
10 pièces |
|
|
Cosmic Orange
(référence créée le 18.09.25) ALE301953
| |
1698,49 € HT
2038,19 € TTC |
En stock
10 pièces |
|
|
(référence créée le 18.09.25) RUT7621 RAM-HOL-ZE25PD2HU
| |
269,42 € HT
323,30 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) JER5030 SVC-COR-SRX4200JB
| |
Prix
Nous consulter | Sur
Commande | |
zoom |
(référence créée le 18.09.25)
TKA0816 RUT95103B700 | |
212,23 € HT
254,68 € TTC |
En stock
31 pièces |
|
|
(référence créée le 18.09.25) SUE93083 725260-001-REF
| |
215,75 € HT
258,89 € TTC |
En stock
9 pièces |
|
|
(référence créée le 18.09.25) SUE93082 4058154223611-REF
| |
126,50 € HT
151,79 € TTC |
En stock
1 pièce |
|
|
This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM NFC Extender can be used to expand the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3NU :Easy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for the RAM NFC ExtenderAdditional information: This holder version will not support the Getac Rotating Hand Strap & Kickstand accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE3NU holder is supplied.
(référence créée le 18.09.25) RUT7620 RAM-HOL-GE3NU
| |
92,15 € HT
110,58 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) RUT7619 RAM-HOL-HON12PDHU
| |
147,15 € HT
176,58 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC8300.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE26PLU :
• Spring-loaded design for easy insertion and removalCharging functionLockable with keyInput Connector: 5.5mm DCInput Voltage: 5.4VInput Cable Length: ca. 100 cmCertification: FSS
• CE
| | • RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE26PLU holder is supplied.
|
(référence créée le 18.09.25) RUT7618 RAM-HOL-ZE26PLU
| |
106,19 € HT
127,42 € TTC | Sur
Commande |
|
|
JAYM®
(référence créée le 18.09.25) JYM1321 JMCAM021
| |
6,55 € HT
7,85 € TTC |
En stock
253 pièces |
|
|
JAYM®
(référence créée le 18.09.25) JYM1320 JMCS0289
| |
7,62 € HT
9,13 € TTC |
En stock
439 pièces |
|
|
Compartiment pour lecteur de support de stockage - 3.5"
(référence créée le 18.09.25) HPE510153 P74741-B21
| |
Prix
Nous consulter |
16
Jours
(Non garanti) |
|
|
JAYM®
(référence créée le 18.09.25) JYM1319 JMCSVT108
| |
7,14 € HT
8,56 € TTC |
En stock
32 pièces |
|
|
(référence créée le 18.09.25) JER5029 SVC-COR-EX4K-48P
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 18.09.25) HPE510152 J9299A-RECONDITIONNE
| |
191,02 € HT
229,22 € TTC |
En stock
21 pièces |
|
|
(référence créée le 18.09.25) CON213731 FM3-H824-000
| |
1745,48 € HT
2094,57 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) POE46291 2P-B173RTN03.0
| |
105,82 € HT
126,98 € TTC |
En stock
6 pièces |
|
|
(référence créée le 18.09.25) RUT7617 RAM-HOL-ZE25PHU
| |
191,63 € HT
229,95 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) NPP5226 SW-ONTAPO-NVME-AD-A09
| |
Prix
Nous consulter | Sur
Commande | |
|
White
(référence créée le 18.09.25) SNG184237
| |
986,13 € HT
1183,35 € TTC |
En stock
184 pièces |
|
|
200-499 users and servers - 36 MOS
(référence créée le 18.09.25) SHS95015 MRASMU36AFNCAA
| |
Prix
Nous consulter | Sur
Commande | |
|
White
(référence créée le 18.09.25) ALE301951
| |
168,86 € HT
202,62 € TTC |
En stock
7 pièces |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22LU :Compatible with accessoriesEasy insertion and removalLockable with keyAdditional mounting plate for attachin
(référence créée le 18.09.25) RUT7616 RAM-HOL-ZE22LU
| |
125,67 € HT
150,80 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) TKA0815 RUTX09220000
| |
333,63 € HT
400,35 € TTC | Sur
Commande |
|
|
25-49 servers - 29 MOS - Renewal
(référence créée le 18.09.25) SHS95014 MDRCSS29BCRCAA
| |
Prix
Nous consulter | Sur
Commande | |
|
18 MOS - Renewal
(référence créée le 18.09.25) SHS95013 SS450018ZZRCAA
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDU :Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functio
(référence créée le 18.09.25) RUT7615 RAM-HOL-HON12PDU
| |
113,35 € HT
136,02 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU :Compatible with Zeb
(référence créée le 18.09.25) RUT7614 RAM-HOL-ZE25PDLU
| |
226,67 € HT
272,00 € TTC | Sur
Commande |
|
|
(référence créée le 18.09.25) JER5028 SVC-COR-SRX4600JB
| |
Prix
Nous consulter | Sur
Commande | |
01 43 00 43 08 (lundi au jeudi 8H30 18H30, vendredi 8H30 17H30) Contactez-nous
