| | DESIGNATION |
REMISE |
PRIX |
DISPO | |
 |
This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU :Easy insertion and removalCharging functionLockable with keyInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmPrepared for GDS-FAN 12-VDC axial fanIncluding RAM NFC-ExtenderAdditional information: This product is not compatible with the GDS Hand-Stand.This holder will not support any NFC functionality of the Tab Active2Potential interference of NFC functionality may occur when posit
(référence créée le 01.12.25) RUT7711 RAM-GDS-DOCKL-SAM62CP-NFCU
| |
241,75 € HT
290,10 € TTC | Sur
Commande | 
|
|
This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged.While keeping the Zebra EC5x secure, the powered dock also leaves the device?s top scanner and buttons exposed and usable.Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU :Only compatible with the IntelliSkin protective sleeveSpring-loaded design for easy insertion and removalIntegrated Stylus holderCharging functionInput Connector: USB-COutput Connector: USB-A (Peripheral output
(référence créée le 01.12.25) RUT7710 RAM-GDS-DOCK-V12-ZE16CPDU
| |
139,74 € HT
167,68 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons allow you to continue using them without any problems.An RAM NFC-Extender module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPKLTU :Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skinSlim-profile design at 2.28' depthAccess to the stylus penOptional attachment of additional devices or accessoriesEasy insertion and removalLockable with keyCharging functionInput Connector: USB-CInput Voltage: 5.3-5.4 VDCOutput Voltage: 5 VDCInput Cable Length: ca. 21 cmAdditional informatio
(référence créée le 01.12.25) RUT7709 RAM-HOL-SAM58CPKLTU
| |
127,21 € HT
152,65 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) MOX0336 Q2G-DP4K2/EW2/SP
| |
166,95 € HT
200,34 € TTC |
En stock
9999 pièces |
|
|
This RAM Mounts GDS IntelliSkin protective sleeve is designed for the Zebra TC53 & TC58 and offers reliable protection combined with convenient charging functionality.The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use.Thanks to its thoughtful design, all device functions remain fully accessible the scanner, camera and buttons can still be used without restriction.Additional cutouts and clearances on the back of the IntelliSkin ensure compatibility with standard and extended battery packs as well as the OEM hand strap.The IntelliSkin case is compatible with a wide range of GDS docks.Product features RAM Mounts RAM-GDS-SKIN-ZE34-GRY :
• Compatible with standard and extended battery packs and OEM hand strapContinued access to scanner
| | • camera and buttonsCharging and data sync functionEasy insertion and removalAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-SKIN-ZE34-GRY is su
|
(référence créée le 01.12.25) RUT7708 RAM-GDS-SKIN-ZE34-GRY
| |
38,68 € HT
46,41 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons allow you to continue using them without any problems.An RAM NFC-Extender module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPT-CAU :Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skinSlim-profile design at 2.28' depthAccess to the stylus penOptional attachment of additional devices or accessoriesEasy insertion and removalWith LatchCharging functionInput Connector: USB-COutput Connector: USB-C & USB-A (Periphera
(référence créée le 01.12.25) RUT7707 RAM-HOL-SAM58CPT-CAU
| |
128,02 € HT
153,62 € TTC | Sur
Commande |
|
|
This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A.An RAM NFC add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON11PDU :Compatible with OEM hand strap Easy insertion and removalCharging functionWith LatchPrepared for
(référence créée le 01.12.25) RUT7706 RAM-HOL-HON11PDU
| |
145,68 € HT
174,81 € TTC |
En stock
4 pièces |
|
|
8g
(référence créée le 01.12.25) ACC0786 ACTCP00091A
| |
9,05 € HT
10,86 € TTC |
En stock
714 pièces |
|
|
CUPG 1 year 15 - 24
(référence créée le 01.12.25) BDR11707 5022ZZBCN120ALZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
999
(référence créée le 01.12.25) BDR11706 5022ZZBSN360GLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
EDU 1 year 100 - 149
(référence créée le 01.12.25) BDR11705 5024ZZBEN120DLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) MOX0335 Q2G-H4K2/EW2/SP
| |
166,95 € HT
200,34 € TTC |
En stock
9999 pièces |
|
|
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE5KLU :
• Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with KeysAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp
| | • Temp Right or NFC repeaterAdditional information: This
|
(référence créée le 01.12.25) RUT7705 RAM-HOL-GE5KLU
| |
183,75 € HT
220,50 € TTC | Sur
Commande |
|
|
This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A.An RAM NFC add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON11PDKLU :Compatible with OEM hand strap Easy insertion and removalCharging functionLockable with k
(référence créée le 01.12.25) RUT7704 RAM-HOL-HON11PDKLU
| |
172,23 € HT
206,67 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) PXX0167 PERIMICE-713 RX
| |
20,59 € HT
24,70 € TTC | Sur
Commande |
|
|
CUPG 1 year 250 - 499
(référence créée le 01.12.25) BDR11704 5023ZZBCN120FLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
GOV R 1 year 250 - 499
(référence créée le 01.12.25) BDR11703 BGMSZZBGR120FLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
CUPG 1 year 50 - 99
(référence créée le 01.12.25) BDR11702 5024ZZBCN120CLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged.While keeping the Zebra Handheld secure, the powered dock also leaves the device?s top scanner and buttons exposed and usable.Available space in the back accommodates extended battery packs and the Zebra hand strap.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU :Only compatible with the In
(référence créée le 01.12.25) RUT7703 RAM-GDS-DOCKL-V12-ZE2434CPDHU
| |
160,14 € HT
192,16 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) MOX0334 Q2G-DP4K2/SP
| |
1216,95 € HT
1460,34 € TTC | Sur
Commande |
|
 |
Mise à niveau concurrentielle de la licence d'abonnement (1 an) - volume - 250 à 499 licences
(référence créée le 01.12.25) BDR11701 5022ZZBCN120FLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A.An RAM NFC add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU :Compatible with OEM hand strap Easy insertion and removalCharging fu
(référence créée le 01.12.25) RUT7702 RAM-HOL-HON11PD2-DB9KLU
| |
236,51 € HT
283,81 € TTC | Sur
Commande |
|
|
EDU 1 year 100 - 149
(référence créée le 01.12.25) BDR11700 5022ZZBEN120DLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
GOV 3 years 50 - 99
(référence créée le 01.12.25) BDR11699 5023ZZBGN360CLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons allow you to continue using them without any problems.An RAM NFC-Extender module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPKLT-AU :Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skinSlim-profile design at 2.28' depthAccess to the stylus penOptional attachment of additional devices or accessoriesEasy insertion and removalLockable with keyCharging functionInput Connector: USB-COutput Connector: USB-A (Perip
(référence créée le 01.12.25) RUT7701 RAM-HOL-SAM58CPKLT-AU
| |
137,53 € HT
165,03 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE5PD2U :Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional
(référence créée le 01.12.25) RUT7700 RAM-HOL-GE5PD2U
| |
273,97 € HT
328,76 € TTC | Sur
Commande |
|
|
This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A.An RAM NFC add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON11PKLU :Compatible with OEM hand strap Easy insertion and removalCharging functionLockable with keyPrepared for RAM NFC Extender & RAM Vent-Temp2-Hole side mount (Diamo
(référence créée le 01.12.25) RUT7699 RAM-HOL-HON11PKLU
| |
160,74 € HT
192,88 € TTC | Sur
Commande |
|
|
4g
(référence créée le 01.12.25) ACC0785 ACTCP00090A
| |
8,42 € HT
10,10 € TTC |
En stock
849 pièces |
|
|
CUPG 3 years 50 - 99
(référence créée le 01.12.25) BDR11698 5024ZZBCN360CLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU :Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmPrepared for GDS-FAN 12-VDC axial fanIncluding RAM NFC-ExtenderAdditional information: This product is not compatible with the GDS Hand-Stand.This holder will not support any NFC functionality of the Tab Active2Potential interference of NFC functionality may occur when positioned close to
(référence créée le 01.12.25) RUT7698 RAM-GDS-DOCK-SAM62CP-NFCU
| |
219,56 € HT
263,47 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) MOX0333 SK-Q2G-A/SP
| |
67,85 € HT
81,42 € TTC | Sur
Commande |
|
|
Business Applications - CUPG 3 years 250 - 499
(référence créée le 01.12.25) BDR11697 5021ZZBCN360FLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
99
(référence créée le 01.12.25) BDR11696 5023ZZBSN360CLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
GOV 1 year 50 - 99
(référence créée le 01.12.25) BDR11695 5023ZZBGN120CLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons allow you to continue using them without any problems.An RAM NFC-Extender module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPT-1AU :Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skinSlim-profile design at 2.28' depthAccess to the stylus penOptional attachment of additional devices or accessoriesEasy insertion and removalWith LatchCharging functionInput Connector: USB-COutput Connector: USB-A (Peripheral output -
(référence créée le 01.12.25) RUT7697 RAM-HOL-SAM58CPT-1AU
| |
103,41 € HT
124,09 € TTC | Sur
Commande |
|
|
14cores - up to 5.0GHz) / Integrated Graphics / Windows 11 Pro
(référence créée le 01.12.25) DLL209324 3400018291369.1-1
| |
13390,16 € HT
16068,19 € TTC | Sur
Commande |
|
|
8 cores - up to 4.7 GHz) with 16GB Memory / Integrated IntelArc graphics for I
(référence créée le 01.12.25) DLL209323 3400018021708.5-1
| |
13390,76 € HT
16068,91 € TTC | Sur
Commande |
|
|
99
(référence créée le 01.12.25) BDR11694 5025ZZBSN360CLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts GDS IntelliSkin Next Gen protective sleeve is designed for the Samsung Galaxy Tab A9+ and offers reliable protection combined with convenient charging functionality.The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use.This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available.Thanks to its thoughtful design, all tablet functions remain fully accessible :
• the camera
• buttons
• and ports can still be used without restriction.The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations
| | • making it ideal for professional use ? whether in vehicles
• at the workplace
• or on the move.Product features RAM Mounts RAM-GDS-SKIN-SAM88-NG-GRY:Compatible with GDS DocksHolder for Stylus PenContinued access to camera and buttonsCharging functionEasy insertion and removalInput Connector: USB-C 2.0Transfer S
|
(référence créée le 01.12.25) RUT7696 RAM-GDS-SKIN-SAM88-NG-GRY
| |
87,20 € HT
104,64 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE5PD2KLU :Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with
(référence créée le 01.12.25) RUT7695 RAM-HOL-GE5PD2KLU
| |
297,24 € HT
356,68 € TTC | Sur
Commande |
|
|
Business Applications - CUPG 1 year 250 - 499
(référence créée le 01.12.25) BDR11693 5021ZZBCN120FLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
- :Compatible with GDS hand-stand Easy insertion and removalCharging functionLockable with keyInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cm· Prepared for GDS 12-VDC Axial cooling fanAdditional information: This product will not support the 'N
(référence créée le 01.12.25) RUT7694 RAM-GDS-DOCKL-SAM88CD2U
| |
241,05 € HT
289,26 € TTC | Sur
Commande |
|
|
This RAM Mounts GDS Desktop Dock with Power Delivery is suitable for smartphones and tablets in IntelliSkin Next Gen, IntelliSkin & IntelliSkin HD protective sleeves.The charging station offers data connectivity via USB-C and the charging function.It is also ideal for permanent use (insertion/removal).Product features RAM Mounts RAM-GDS-DOCK-D2CM-NDU-GRY :
• Only compatible with IntelliSkin Next Gen protective sleeveEasy insertion and removalPower Delivery & DeX Support (Next Gen)Input Connector: USB-COutput Voltage:5V @ 2A5V @ 3A12V @ 1.5A12V @ 3AOutput Power: 48W TotalProduct dimensions:Height: 5
• 08 cmWidth: 7
| | • 62 cmDepth: 10
• 41 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-D2CM-NDU-GRY Dock is supplied.
|
(référence créée le 01.12.25) RUT7693 RAM-GDS-DOCK-D2CM-NDU-GRY
| |
114,78 € HT
137,73 € TTC | Sur
Commande |
|
|
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE5PDKLU :Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAd
(référence créée le 01.12.25) RUT7692 RAM-HOL-GE5PDKLU
| |
278,90 € HT
334,68 € TTC | Sur
Commande |
|
|
- :Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: USB-C (Peripheral output - 500mAh)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the 'No Battery Mode' function. Devices shown are not i
(référence créée le 01.12.25) RUT7691 RAM-GDS-DOCK-SAM62C-CU
| |
182,06 € HT
218,47 € TTC | Sur
Commande |
|
|
This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A.An RAM NFC add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON11U :
• Compatible with OEM hand strap Easy insertion and removalWith LatchPrepared for RAM NFC Extender & RAM Vent-Temp2-Hole side mount (Diamond ball base) for additional devices or peripheral accessoriesCertifications: RoHS
• WEEE
| | • CE & FCCAdditional inform
|
(référence créée le 01.12.25) RUT7690 RAM-HOL-HON11U
| |
99,67 € HT
119,60 € TTC | Sur
Commande |
|
|
This RAM Mounts EZ-Roll?r Form-Fit holder is suitable for Samsung Tab Active3 in an OtterBox uniVERSE case.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM60CP-OT1U :Compatible with accessoriesCan only be used with OtterBox uniVERSE caseAccess to the stylus penEasy insertion and removalCharging functionInput Connector: USB-CInput Voltage: 5.3-5.4 VDCOutput Voltage: 5 VDCInput Cable Length: ca. 21 cmAdditional information:This product will not support the 'No Battery Mode' function.Devices shown are not included in the delivery.Only the RAM-HOL-SAM60CP-OT1U holder is supplied.
(référence créée le 01.12.25) RUT7689 RAM-HOL-SAM60CP-OT1U
| |
71,55 € HT
85,86 € TTC | Sur
Commande |
|
|
CUPG 3 years 500 - 999
(référence créée le 01.12.25) BDR11692 5022ZZBCN360GLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
- :Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: USB-A (Peripheral output - 500mAh)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.
(référence créée le 01.12.25) RUT7688 RAM-GDS-DOCK-SAM88CDU
| |
203,18 € HT
243,81 € TTC | Sur
Commande |
|
|
2g
(référence créée le 01.12.25) ACC0784 ACTCP00089A
| |
6,18 € HT
7,41 € TTC |
En stock
421 pièces |
|
|
14cores - up to 5.0GHz) / Integrated Graphics / Windows 11 Pro
(référence créée le 01.12.25) DLL209322 3400017569659.3-1
| |
13390,16 € HT
16068,19 € TTC | Sur
Commande |
|
|
GOV 3 years 500 - 999
(référence créée le 01.12.25) BDR11691 5023ZZBGN360GLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) SGY8683 BUNDLE DS124/1G/2Y/4T-HAT33XX
| |
344,06 € HT
412,87 € TTC | Sur
Commande |
|
|
8 cores - up to 4.7 GHz) with 16GB Memory / Integrated IntelArc graphics for I
(référence créée le 01.12.25) DLL209321 3400018021708.5-2
| |
13390,76 € HT
16068,91 € TTC | Sur
Commande |
|
|
R 3 years 150 - 249
(référence créée le 01.12.25) BDR11690 BGMSZZBSR360ELZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.The included RAM NFC extender supports the NFC function with a range of up to 30 cm.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, GDS Roto-Mag and side accessory attachments.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM58CPKL-NFCU :Compatible with accessoriesIncluding RAM NFC-ExtenderCan only be used with OEM or RAM skinAccess to the stylus penEasy insertion and removalCharging functionLockable with keyInput Connector: USB-CInput Voltage: 5.3-5.4 VDCOutput Voltage:
(référence créée le 01.12.25) RUT7687 RAM-HOL-SAM58CPKL-NFCU
| |
189,11 € HT
226,93 € TTC | Sur
Commande |
|
|
CUPG 1 year 150 - 249
(référence créée le 01.12.25) BDR11689 5022ZZBCN120ELZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE5PKLU :
• Compatible with the Getac tablet accessoiresNot compatible with the Getac 4-point hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp
| | • Temp Right or NFC repeaterInput Connector: 5.5
|
(référence créée le 01.12.25) RUT7686 RAM-HOL-GE5PKLU
| |
258,07 € HT
309,68 € TTC | Sur
Commande |
|
|
Mini - Ultra 5 235T - 16GB RAM - 512GB SSD - Win 11 Pro
(référence créée le 01.12.25) HPQ630136 BY7A0ET#ABH
| |
1026,02 € HT
1231,22 € TTC |
En stock
47 pièces |
|
|
Mise à niveau concurrentielle de la licence d'abonnement (3 ans) - volume - 250 à 499 licences
(référence créée le 01.12.25) BDR11688 5023ZZBCN360FLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
- :Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3A maxOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM88CD2U holder is
(référence créée le 01.12.25) RUT7685 RAM-GDS-DOCK-SAM88CD2U
| |
212,85 € HT
255,42 € TTC | Sur
Commande |
|
|
GOV 1 year 100 - 149
(référence créée le 01.12.25) BDR11687 5022ZZBGN120DLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
CUPG 2 years 500 - 999
(référence créée le 01.12.25) BDR11686 5023ZZBCN240GLZZ
| |
Prix
Nous consulter | Sur
Commande | |
|
- :Only compatible with the IntelliSkin protective sleeveSpring-loaded design for easy insertion and removalIntegrated Stylus holderCharging functionInput Connector: USB-COutput Connector: USB-A (Peripheral output - 500mAh)
(référence créée le 01.12.25) RUT7684 RAM-GDS-DOCK-V12-ZE2434CPDU
| |
114,35 € HT
137,22 € TTC | Sur
Commande |
|
|
This RAM Mounts EZ-Roll?r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments.Modular docks are not compatible with the GDS Hand-StandThe back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM60CPN-CAU :Compatible with accessoriesCan only be used with OEM or RAM skinAccess to the stylus penEasy insertion and removalCharging functionInput Connector: USB-COutput Connector: USB-C
(référence créée le 01.12.25) RUT7683 RAM-HOL-SAM60CPN-CAU
| |
112,69 € HT
135,22 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) SGY8680 BUNDLE DS225
+ /2x HAT33XX-8T
| |
1160,47 € HT
1392,56 € TTC | Sur
Commande |
|
|
This RAM Mounts EZ-Roll?r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments.Modular docks are not compatible with the GDS Hand-Stand.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-SAM60CPN-1AU :Compatible with accessoriesCan only be used with OEM or RAM skinAccess to the stylus penEasy insertion and removalCharging functionInput Connector: USB-COutput Connector: USB-A 1
(référence créée le 01.12.25) RUT7682 RAM-HOL-SAM60CPN-1AU
| |
86,16 € HT
103,39 € TTC | Sur
Commande |
|
|
24 cores - 24 threads - 3.2 GHz to 5.7 GHz - 125W) / NVIDIARTX 4000 ADA - 20 GB
(référence créée le 01.12.25) DLL209320 3400018292206.2-1
| |
13390,16 € HT
16068,19 € TTC | Sur
Commande |
|
|
CUPG 2 years 100 - 149
(référence créée le 01.12.25) BDR11685 5023ZZBCN240DLZZ
| |
Prix
Nous consulter | Sur
Commande | |
zoom |
(référence créée le 01.12.25)
WAL5724 0B48716 | |
Prix
Nous consulter | Sur
Commande | |
zoom |
(référence créée le 01.12.25)
WAL5724 0B48716 | |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) EZA0268 ELK214W
| |
6,26 € HT
7,51 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) EZA0267 EFL004
| |
19,38 € HT
23,25 € TTC |
En stock
6 pièces |
|
|
(référence créée le 01.12.25) WAL5723 MY PASSPORT EXTERNAL HARD
| |
Prix
Nous consulter | Sur
Commande | |
|
Rouleau d'imprimante - 203 dpi
(référence créée le 01.12.25) BER26401 PA-PR2-002
| |
25,30 € HT
30,36 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) WAL5722 Z069673
| |
Prix
Nous consulter | Sur
Commande | |
|
Tapis de souris
(référence créée le 01.12.25) EZA0266 EGP102G
| |
3,18 € HT
3,81 € TTC | Sur
Commande |
|
|
Tapis de souris avec repose-poignets - bleu
(référence créée le 01.12.25) EZA0265 EA137B
| |
3,90 € HT
4,68 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) BER26400 4977766767699
| |
20,36 € HT
24,43 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25)
EZA0264 EA119 | |
5,36 € HT
6,43 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) BER26399 PTN25BTRG1
| |
57,34 € HT
68,80 € TTC |
En stock
15 pièces |
|
|
(référence créée le 01.12.25) EZA0263 ELK214K
| |
5,92 € HT
7,10 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) WAL5720 Z069674
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) SNG184726 SM-A26 256 BLACK
| |
291,46 € HT
349,74 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) KCA40713 A1DUR70X99
| |
373,45 € HT
448,14 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) RER1442 446520
| |
83,12 € HT
99,73 € TTC | Sur
Commande |
|
|
Arabic
(référence créée le 01.12.25) DLL209319 KM3322W-R-ARA
| |
25,41 € HT
30,49 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) WAL5719 1ES2796
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) WAL5718 7211310T7050000000RS
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) RUT7681 RAP-365-138U
| |
83,16 € HT
99,79 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) EZA0262 ELK212K
| |
5,22 € HT
6,26 € TTC | Sur
Commande |
|
zoom |
(référence créée le 01.12.25)
BER26398 MFC-J4550DWRE1 | |
247,19 € HT
296,63 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) MAS1574 7350073736782
| |
896,42 € HT
1075,70 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) BER26397 DCPT430WYJ1
| |
209,84 € HT
251,80 € TTC |
En stock
170 pièces |
|
|
Rouleau (10,6 cm x 51,8 m) - 74 g/m² - 9 rouleau(x) étiquettes continues
(référence créée le 01.12.25) BER26396 BFA-274106-080
| |
141,79 € HT
170,14 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) ISO0800 7505624
| |
10,89 € HT
13,06 € TTC | Sur
Commande |
|
|
(référence créée le 01.12.25) WAL5717 718037887357
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) WAL5716 1EX3303
| |
Prix
Nous consulter | Sur
Commande | |
|
(référence créée le 01.12.25) WAL5713 721138006050600000RS
| |
Prix
Nous consulter | Sur
Commande | |
|
dessus enduit - 35 x 30 mm 30000 étiquette(s) (12 rouleau(x) x 2500 Étiquettes en forme découpée
(référence créée le 01.12.25) BER26395 BDH-1J030035-120
| |
125,73 € HT
150,87 € TTC | Sur
Commande |
|
01 43 00 43 08 (lundi au jeudi 8H30 18H30, vendredi 8H30 17H30) Contactez-nous
